How To Connect Hikvision Cameras Not Directly Connected To Nvr

When y'all use an NVR with a built-in PoE switch, the IP cameras go plugged in directly to the back of the recorder and in this case, it may go complicated to access these cameras directly.

This kind of setup is different from the one where the IP cameras are continued to an external PoE switch,  you lot can access each camera via web browser by typing the IP address. Merely what IP address to blazon in if the cameras are going directly to the back of the PoE NVR?

Allow'southward first by explaining why you demand to admission each IP camera individually. While you lot tin adjust many settings on the photographic camera by using the NVR's interface, there are certain settings that can be adapted only by accessing the photographic camera direct. In a few words, when going to the camera directly you have command over all the settings of that camera.
Settings such every bit Day/Night sensor settings, exposure, backlight, and other epitome quality-related settings which may improve the overall performance of your security system are adjustable on the photographic camera itself simply (not via the NVR). Too in some systems, the firmware of the IP camera can only be updated directly on the photographic camera (not via the NVR).

One manner to admission those IP cameras is by unplugging them, connecting the camera to an external switch and then modifying the IP address via the laptop and accessing it via the spider web browser.

As you tin meet, this method takes a lot of work, and imagine if yous have a lot of cameras that need to accept the settings adjusted. It would be a nightmare. There'due south a different approach that is more convenient and saves a lot of time.

There are two principal ways how security systems are ready (for small businesses and home defence force). One is the setup where the IP cameras are plugged into an external switch and the NVR accesses them via the network.

The second i is the PoE NVR system where the cameras go straight at the back of the NVR. This guide shows how to access the camera that is connected direct to the PoE NVR (NVR with born PoE switch).

The IP cameras are continued to an external switch

Every bit shown in the diagram beneath, the IP cameras are connected to an external (PoE) switch and the NVR is continued to the same switch (or straight to the router). In this case, all the devices are in the same network and the NVR can see the IP cameras via the network.

Let's say you lot desire to access one of the IP cameras. All you demand to do is to find the IP address of this camera, type it on the spider web browser and type the username/password of the photographic camera (in this example 192.168.1.150). After that, you lot'll be able to see the internal settings of the photographic camera and adjust them as needed.

If you don't know the IP accost of the camera, apply IP finder tools to locate it. Each manufacturer has its ain scanning tool, for Hikvision devices y'all demand to use the SADP Tool, for Dahua cameras Config Tool so on.

The IP cameras are plugged in direct to a PoE NVR

As you can meet in the next diagram, in this kind of setup the IP cameras are plugged in directly at the back of the PoE NVR. So, the cameras are connected direct to the PoE NVR and the NVR itself is connected to the router where the laptop/figurer is getting the internet from.

We can type the IP accost of the NVR itself (for example 192.168.1.100) on the web browser and access the settings, live view, and playback, etc.

But we can't type the IP address of the cameras on the web browser because the laptop doesn't see these cameras via the local network. All these cameras are on a separate network under the NVR (which makes them inaccessible from the outside).

In other words, the laptop/computer can run into the NVR since they're on the same network but can't run into the camera since technically they're located on a different and separate network. Of course, there's a way to access the photographic camera and that's by using the Virtual Host feature that most of the NVRs support.
To clarify, not all recorders support this feature but most of them practise. We won't get too technical, in a few words the Virtual Host role on CCTV security systems enables you to access those IP cameras from your laptop. You lot access the PoE NVR and through automatically assigned ports you tin can admission each camera individually.

This guide will show how to access IP cameras plugged into a PoE NVR. To demonstrate we volition employ a Hikvision PoE NVR, however, the instructions and the logic are almost the same beyond all the recorders that support the Virtual Host feature.

How to access an IP photographic camera connected to Hikvision PoE NVR

Pace 1. The first stride consists of finding the IP address of your NVR. You can find it via the NVR'due south local interface on the Network settings (as shown on the screenshot below) or you install the SADP tool on your laptop and the tool will testify the current IP address of the NVR.
Once you know the IP address of your NVR, open up upward the web browser in your laptop (in our instance Net Explorer) and type the IP address for case: http://192.168.1.100:82 (82 is the http port which in this demonstration is 82).

The default http port on Hikvision devices is fourscore, in that case you lot should type http://192.168.1.100 (without 80 added at the end). Enter the username and the password of the NVR.

Pace 2. In this pace, you demand to enable the Virtual Host feature on the Hikvision NVR. Navigate to Configuration > Network > Avant-garde Settings and select the Other tab. Hither you have to tick the Enable Virtual Host box.

Footstep 4. Become to Configuration > System > Photographic camera Direction and on the right side of the screen you'll run into a clickable link for each IP photographic camera connected to the PoE NVR.

Click it and you can directly become to the camera setting page. So, once we enable the Virtual Host each camera is able to exist accessed directly via the PoE NVR.

Let'due south say we want to access the full settings on the first camera. Simply click the bluish link beside it and yous'll get automatically redirected to the login page of the photographic camera.

Enter the username and the countersign for the photographic camera itself. Most of the time the PoE NVR and the IP camera share the aforementioned credentials.
After that you should meet the individual live pic of the camera.
If y'all click the Configuration tab on the pinnacle you can access the rest of the settings such as: Network, Epitome Settings, Video/Audio, Storage (if your camera has a microSD card), etc.
The instructions shown here are valid for any Hikvision NVR arrangement, however, the idea and the logic is the aforementioned across different manufacturers.

But enable the Virtual Host function and you can access the camera via the NVR. This method saves a lot of time since the other choice is to unplug the camera from the NVR and plug it on an external switch.

Source: https://securitycamcenter.com/access-ip-camera-poe-nvr-hikvision/

Posted by: mcelfreshvies1948.blogspot.com

Share this post